平博亚洲版

Bio

Dr. Md. Habibur Rahman Sobuz, PhD, MIEB, is an Associate Professor of Materials and Structural Engineering. He has over 12 years of industrial experience in consultancy and contracting in designing and constructing multi-story reinforced concrete structures and composite steel in Bangladesh. This was followed by nine years of research experience in higher studies, then lecturing at Khulna University of Engineering and Technology (平博亚洲版), Bangladesh, in 2016.

Dr. Habibur has a BSc from 平博亚洲版, Bangladesh, an MSc in Structural Engineering from the University Malaysia Sarawak, Malaysia, and a PhD from the University of Adelaide, Australia. His research expertise on the flexural, strength, and ductility behavior of RC Members, strengthening and retrofitting of RC members, time-dependent performance of RC structures, new generation ultra-high performance fiber reinforced concrete (UHPFRC), concrete sustainability and durability, low-cost, lightweight aggregate concrete by using waste materials and machine learning for materials quantification and characterization.

Dr. Habibur is a leading researcher in structural and material engineering. His PhD research focuses on ultra-high performance fiber reinforced concrete manufacturing, structural performance, and numerical modeling of the segmental moment-rotation approach by using partial-interaction theory in RC structures. Through his Master's research, he has developed techniques for strengthening and stiffening RC structures bonding with fibre reinforced polymer (FRP) to their surfaces to increase their strength and ductility. His research also focuses on lightweight concrete production by utilizing waste materials following RC members' material properties and structural performance. Currently, he is conducting research on material quantification and characterization by adopting advanced machine-learning quantifications in the engineering field.

He has contributed two books and numerous book chapters, over 150 technical papers with 100 journal articles, and 40 conferences proceeding as author and co-author. Dr. Habibur teaches structural design and analysis, reinforced concrete design, steel and prestressed structure, Foundation analysis and design, and Tall building design and analysis.

Education

Ph.D. in Structural Engineering

The University of Adelaide,Australia (2012-2016)

Thesis Title: The Manufacture and Compressive Ductility of Ultra-high Performance Fiber Reinforced Concrete

M.Sc. in Structural Engineering

University Malaysia Sarawak ,Malaysia (2009-2011)

Thesis Title: Flexural and Time-dependent Deflection Behavior of Reinforced Concrete Beams Strengthened with CFRP Laminates

B.Sc. in Civil Engineering

Khulna University of Engineering and Technology ,Bangladesh (2002-2006) Group: Civil Engineering ,

Study on Salinity of Brick Manufactured by Conventional Technique and it芒鈧劉s Removal Process

HSC

Shahzadpur Govt. College ,Bangladesh (2001) Group: Science,

SSC

Shahzadpur Pilot High School ,Bangladesh (1999) Group: Science,

Scholarship and Award

DSTO Industry Scholarship Collaboration with School of Civil, Environment and Mining Engineering, The University of Adelaide, Australia
During my PhD
International Postgraduate Research Scholarship (IPRS), Australia
During my PhD
Commonwealth Scholarship in Australia and Australian Postgraduate Award (APA)
During my PhD
Research Assistant, Faculty of Engineering, Department of Civil Engineering, University Malaysia Sarawak, Sarawak, Malaysia
Zamalah Pascasiswazah Award and Scholarship, Malaysian Government Scholarship (Tuition fees waive), Sarawak, Malaysia
Merit Order Scholarship, Bangladesh Government (Manpower Development), Khulna University of Engineering and Technology, Bangladesh
Home District Scholarship at the period of Higher Secondary Certificate (H.S.C) Level, Bangladesh Government (Sirajgonj District)
Home District Scholarship at the period of Secondary School Certificate (S.S.C) Level, Bangladesh Government (Sirajgonj District)
R & D EXPO Building RDI & C Competencies for Academic Excellence, University Malaysia Sarawak (UNIMAS), Malaysia (Bronze Medal Winner and Certificate)
Research Exhibition

Research

Structural and Material Engineering

Experience

Service Records

Structural Design Engineer
The Civil and Structures 09-May-2025 to 09-May-2025
Working Area: Structural Engineering

Structural Design Engineer
Tarique Hasan and Associate Limited 09-May-2025 to 09-May-2025
Working Area: Structural Engineering

Research Assistantships

Department/Section: Civil Engineering
University Malaysia Sarawak 09-May-2025 to 09-May-2025
Working Area: Structural Engineering

Teaching Assistanship

Department/Section: School of Civil, Environment and Mining Engineering
The University of Adelaide 09-May-2025 to 09-May-2025
Working Area: Civil Engineering

Research Fellow

Department/Section: School of Civil, Environment and Mining Engineering
The University of Adelaide 09-May-2025 to 09-May-2025
Working Area: Structural Engineering

Assistant Professor

Department/Section: Building Engineering and Construction Management
Khulna University of Engineering and Technology 09-May-2025 to 09-May-2025
Working Area: Structural Engineering

Professional Body Membership

The Institution of Engineers, Bangladesh

Member Type: Member
Member ID: 37077

Teaching and Supervision

#Course Supervision

芒鈧� CE 3111 Structural Analysis and Design 芒鈧€� I 芒鈧� CE 3211 Structural Analysis and Design 芒鈧€� II 芒鈧� CE 3113 Reinforced Concrete Structures 芒鈧€� I 芒鈧� CE 3213 Reinforced Concrete Structures 芒鈧€� II 芒鈧� CE 2114 Practical on Mechanics of Solids 芒鈧� CE 3114 Practical on Reinforced Concrete Structures 芒鈧� CE 4221 Design of Steel Structures 芒鈧� CE 4223 Precast and Prestressed Concrete 芒鈧� BECM 4230 Practical on Structural Health Monitoring 芒鈧� BECM 4105 Health and Safety in Construction

List of Publications

LIST OF PUBLICATIONS

Books:

1. Md. Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan and Ehsan Ahmed (2011): Salinity Removal of Brick Clay by using Different Techniques, (ISBN-13: 978-3-639-33708-2), VDM Publishing House Ltd, VDM Verlag Dr. Müller GmbH & Co. KG, Germany.

2. Ehsan Ahmed, Md. Habibur Rahman Sobuz and Bong Fui Zin (2011): Time-Dependent Deflection of Palm Shell Aggregate RC Beams, (ISBN-13: 978-3-8443-9595-2), Lap Lambert Academic Publishing, GmbH & Co. KG, Heinrich-Böcking-Straße 6, 66121 Saarbrücken, Germany.

Books Chapter:

1. Md. Saiful Islam, M.R. Hasan, Kh. Nurul Islam, Md. Moynul Islam, Md. Habibur Rahman (2021): Physical, Mechanical and Thermal Properties of Wood Polymer Nanocomposites, Plastic and Polymer Materials, Elsevier Ltd, USA.

2. Md. Habibur Rahman Sobuz, Md. Kawsarul Islam Kabbo, Turki S. Alahmari, Mahmudur Hossain Khan (2024) Predicting The Compressive Strength of Sustainable Cement Mortar Composite Incorporating Biochar: A Hybrid Machine Learning Modeling Approach, Artificial Intelligence in Removal of Emerging Contaminants: Sustainable Approach for Environmental Clean-up and Circular Economy, Elsevier Ltd, USA (Under Revision).

3. Md. Habibur Rahman Sobuz, Jannat Ara Jabin, Fahim Shahriar Aditto, Md. Saiful Islam (2024) Performance Enhancement of Waste Products Used as Aggregate, , Elsevier Ltd, USA (Under Revision).

4. Jannat Ara Jabina, Md. Habibur Rahman Sobuz, Md. Tareq Hossain Khondoker (2024) Performance Enhancement of Waste Products Used as Aggregate, , Elsevier Ltd., USA. (Under Revision).

Journal Editorships:

1. Md. Saiful Islam, Md. Habibur Rahman Sobuz (2023): Special Issue "Sustainable Composites and the Environment", Sustainability, MDPI Publishing.

2. Md. Saiful Islam, Md. Habibur Rahman Sobuz (2024): Special Issue "Sustainable Composites, Construction and Artificial Intelligence Optimization", Sustainability, MDPI Publishing.

Refereed Journals:

94. Md. Habibur Rahman Sobuz, Arafat Alam Akash, Deric John Oehlers, Phillip Visintin, Abdul Hamid Sheikh, Mohammad Ali, Michael Grifitth (2023): Experimental and analytical studies of size effects on compressive ductility response of Ultra-High-Performance Fiber-Reinforced concrete, Construction and Building Materials, Elsevier Ed., , 15 December 2023, 133864, (Impact factor = 7.4).

93. Md. Habibur Rahman Sobuz, Md Montaseer Meraz, Md. Abu Safayat, Nusrat Jahan Mim, Md. Tanjid Mehedi, Ehsan Noroozinejad Farsangi, Rajesh Kumar Shrestha, Sk Abdul Kader Arafin, Tayyaba Bibi (2023): Performance evaluation of high-performance self-compacting concrete with waste glass aggregate and metakaolin, Journal of Building Engineering, Elsevier Ed., Vol. 67, 105976, , (Impact factor = 6.4).

92. Md. Habibur Rahman Sobuz, Phillip Visintin, Mohammad Ali, Manpreet Singh, Michel Griffith and Abdul Hamid Sheikh (2016): Manufacturing ultra-high performance concrete utilising conventional materials and production methods, Construction and Building Materials, Elsevier Ed., Vol. 111, May 2016, pp. 251-261.

91. Md. Habibur Rahman Sobuz, Fahim Shahriyar Aditto, Shuvo Dip Datta, Md. Tareq Hossain Khondoker, Noor Md. Sadiqul Hasan, Md. Kawsarul Islam Kabbo, Jannat Ara Jabin (2024): Predicting the response of high-strength self-compacting concrete incorporating supplementary cementitious materials: Experimental evaluations and machine learning modelling, International Journal of Concrete Structures and Materials, Springer Link, 18, 67 (2024). .

90. Ibrahim Hakeem, Bothaina Osama, Weiwen Li, Peng Wang, Md. Habibur Rahman Sobuz, Mohammad Ghalib Al Hudeesh, Walid Mansour (2024): Restoration of load capacity and stiffness of continuous steel-concrete composite beams having web openings using externally applied FRP, Structural Concrete, Wiley, July 2024, pp. 1-26. .

89. Shuvo Dip Datta, Md. Habibur Rahman Sobuz, Abu Sayed Mohammad Akid, and Norsuzailina Mohamed Sutan (2022): Evaluating the size and replacement effect of coarse aggregate on the properties of recycled aggregate concrete using destructive and non-destructive techniques, Journal of Building Engineering, Elsevier Ed., Vol. 61, 105249, (Impact factor = 6.4).

88. Md. Habibur Rahman Sobuz, Md. Kawsarul Islam Kabbo, Fahim Shahriyar Aditto, Jannat Ara Jabin, Noor Md. Sadiqul Hasan (2024): Mechanical and durability properties of structural cellular concrete incorporating waste marble powder and silica fume, Journal of Building Engineering, Elsevier Ed., (In Revision).

87. Ayan Saha, Fahim Shahriyar Aditto, Lopa Kundu, Md. Habibur Rahman Sobuz, Md. Musharrof Hossain Sunny (2024): Analysis of Waste Glass as a Partial Substitute for Coarse Aggregate in Self-Compacting Concrete: An Experimental and Machine Learning Study, Journal of Building Engineering, Elsevier Ed., Elsevier Ed. (In Revision).

86. Md. Mottakin, Shuvo Dip Datta, Md. Mehrab Hossain, Md. Habibur Rahman Sobuz, SM Arifur Rahman, Mohammad Alharthai (2024): Performance evaluation of textile effluent treatment plant sludge as supplementary cementitious material in concrete using destructive, non-destructive and machine learning approaches, Journal of Building Engineering, Elsevier Ed., Available online 2 September 2024, 110627, Elsevier Ed.,

85. Jannat Ara Jabin, Md. Tareq Hossain Khondoker, Md. Habibur Rahman Sobuz, Fahim Shahriyar Aditto (2024): High-temperature effect on the mechanical behavior of recycled fiber-reinforced concrete containing volcanic pumice powder: An experimental assessment combined with machine learning (ML)-based prediction, Construction and Building Materials, Elsevier Ed., Vol. 418, 135362 (Impact factor = 7.4).

84. Ayan Saha, Tanjil Morshed Tonmoy, Md. Habibur Rahman Sobuz, Fahim Shahriyar Aditto, Walid Mansour (2024): Assessment of mechanical, durability and microstructural performance of sulphate-resisting cement concrete over portland cement in the presence of salinity, Construction and Building Materials, Elsevier Ed., Vol. 418, 135362, (Impact factor = 7.4).

83. Md. Habibur Rahman Sobuz, Mahmudur Hossain Khan, Md. Kawsarul Islam Kabbo, Ali Hussain Alhamami, Fahim Shahriyar Aditto, Md. Saziduzzaman Sajib, U. Johnson Alengaram, Walid Mansour, Noor Md. Sadiqul Hasan, Shuvo Dip Datta, Arafat Alam (2024): Assessment of mechanical characteristics with machine learning prediction and microstructural characteristics of a biochar-cement mortar composite, Construction and Building Materials, Elsevier Ed., Vol. 411, 134281, (Impact factor = 7.4).

82. Md. Habibur Rahman Sobuz, Al-Imran, Shuvo Dip Datta, Jannat Ara Jabin, Fahim Shahriyar Aditto, Noor Md. Sadiqul Hasan, Mahamudul Hasan, Ahmad Akib Uz Zaman (2024): Assessing the influence of sugarcane bagasse ash for the production of eco-friendly concrete: Experimental and machine learning approaches, Case Studies in Construction Materials, Elsevier Ed., , Available online 30 December 2023. (Impact factor = 6.2).

81. Shuvo Dip Datta, Md. Mamun Sarkar, Arifa Sultana Rakhe, Fahim Shahriyar Aditto, Md. Habibur Rahman Sobuz, Nur Mohammad Nazmus Shaurdho, Nusrat Jahan Nijum & Suman Das (2024): Analysis of the Characteristics and Environmental Benefits of Rice Husk Ash as an Eco-friendly Cementitious Material through Experimental and Machine Learning Approaches, Innovative Infrastructures Solution, Vol. 9, article number 121, Springer Link, .

80. Md Montaseer Meraz, Md. Habibur Rahman Sobuz, Nusrat Jahan Mim, Alamry Ali, Md. Saiful Islam, Md. Abu Safayet, Md. Tanjid Mehedi (2023): Using rice husk ash to imitate the properties of silica fume in high-performance fiber-reinforced concrete (HPFRC): A comprehensive durability and life-cycle evaluation, Journal of Building Engineering, Elsevier Ed., Vol. 76, 107219, , (Impact factor = 6.4).

79. Md. Habibur Rahman Sobuz, Md Montaseer Meraz, Md. Abu Safayat, Nusrat Jahan Mim, Md. Tanjid Mehedi, Ehsan Noroozinejad Farsangi, Sk Abdul Kader Arafin, Rajesh Kumar Shrestha, Md. Shakhaoat Hussain (2023): Corrigendum to “On the utilization of rice husk ash in high-performance fiber reinforced concrete (HPFRC) to reduce silica fume content”[Constr. Build. Mater. 369 (2023) 130576], Construction and Building Materials, Elsevier Ed., Volume 394, 131899, , (Impact factor = 7.4).

78. Md. Habibur Rahman Sobuz, Ehsan Ahmed, Norsuzailina Mohamad Sutan, Noor Md. Sadiqul Hasan, Md. Alhaz Uddin and Md. Jahir Uddin (2012): Bending and time-dependent responses of RC beams strengthened with bonded carbon fiber composite laminates, Construction and Building Materials, Elsevier Ed., , April 2012, pp. 597-611.

77. Md. Munir Hayet Khan, Md. Habibur Rahman Sobuz, Md Montaseer Meraz, Vivian W. Y. Tam, Noor Md. Sadiqul Hasan, and Nur Mohammad Nazmus Shaurdho (2023): Effect of various powder content on the properties of sustainable self-compacting concrete, Case Studies in Construction Materials, Elsevier Ed., Vol. 19, December 2023, e02274, , (Impact factor = 6.2).

76. Md. Habibur Rahman Sobuz, Md. Saiful Islam, Abu Sayed Mohammad Akid, Shuvo Dip Datta, Turki S. Alahmari, Noor Md. Sadiqul Hasan, Md. Tareq Hossain Khondoker and Fahim Shahriyar Aditto (2023): Mechanical Properties and Flexural Response of Palm Shell Aggregate Lightweight Reinforced Concrete Beam, Sustainability 2023, 15(22), 15783, MDPI Publishing, . (Impact factor = 6.2).

75. Md. Habibur Rahman Sobuz, Limon Paul Joy, Abu Sayeed Mohammad Akid, Fahim Shahriyar Aditto, Jannat Ara Jabin, Noor Md. Sadiqul Hasan, Montasor Meeraz, Md. Kawsarul Islam Kabbo, Shuvo Dip Dattaa (2024): Optimization of Recycled Rubber Self-Compacting Concrete: Experimental Findings and Machine Learning-based Evaluation, Heliyon, Elsevier Ed.,

74. Walid Mansour, Weiwen Li, Peng Wang, Cheikh Makhfouss Fame,Lik-ho Tam, Yao Lu, Md. Habibur Rahman Sobuz, Noha Elwakkad (2024): Improving the flexural response of timber beams using exter-nally bonded carbon fibre-reinforced polymer (CFRP) sheets, Materials 2024, 17(2), 321; (Impact factor = 3.4).

73. Md. Habibur Rahman Sobuz, Jannat Ara Jabin, Jawad Ashraf, Fayad Afzal, Md. Tanvir Anzum, Md. Tanvir Rahman Rifat and Tamim Adnan (2024): Enhancing Sustainable Concrete Production by Utilizing Fly Ash and Recycled Concrete Aggregate with Experimental Investigation and Machine Learning Modeling, Journal of Building Pathology and Rehabilitation, Volume 9, Article number 134, Springer Link. https://doi.org/10.1007/s41024-024-00474-8

72.Turki S. Alahmari, Jawad Ashraf, Md. Habibur Rahman Sobuz, and Md. Alhaz Uddin (2024): Predicting the Compressive Strength of Fiber-Reinforced SelfConsolidating Concrete Using a Hybrid Machine Learning Approach, Innovative Infrastructures Solutions, Springer Link (Accepted for Publication).

71. Dongmei Chen, Yueshun Chen, Lu Ma, Md. Habibur Rahman Sobuz, Md. Kawsarul Islam Kabbo and Md. Munir Hayet Khan (2024): A state of review on manufacturing and effectiveness of ultra-high-performance fiber reinforced concrete for long-term integrity of concrete structures, Advances in Concrete Construction, Vol. 17, No. 5, May 2024 , pages 293-310, Techno Press, https://doi.org/10.12989/acc.2024.17.5.293

70. Md. Tanjid Mehedi, Md. Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Jannaat Ara Jabin, Nusrat Jahan Nijum and Md. Jihad Miah (2024): High-strength fiber reinforced concrete production with incorporating volcanic pumice powder and steel fiber: sustainability, strength and machine learning technique, Asian Journal of Civil Engineering, Springer Link, . Published Online: 10 September 2024

69. Farhan Nadim, Rakibul Hasan, Md. Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Shuvo Dip Datta, Md. Haimul Islam, Md. Ashraful Islam, Md. Robiul Awall, Yaqoob Yousif Oleiwi Saif (2024): Effect of Silica Fume on the Microstructural and Mechanical Properties of Concrete Made with 100% Recycled Aggregates, Revista De La Construcción. Journal of Construction, 23(2), 413–435,

68. Al-Saraireh Majd Ali, Md. Habibur Rahman Sobuz (2024): Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete Production: A Review, Civil Engineering and Architecture, Vol. 12, No. 4, pp. 2952 – 2969. https://doi.org/10.13189/cea.2024.120433.

67. Fahim Shahriyar Aditto, Md. Habibur Rahman Sobuz, Ayan Saha, Jannat Ara Jabin, Md. Kawsarul Islam Kabbo, Noor Md. Sadiqul Hasan and Shoaib Islam (2023): Fresh, mechanical and microstructural behaviour of high-strength self-compacting concrete using supplementary cementitious materials, Case Studies in Construction Materials, Elsevier Ed., Vol. 19, December 2023, e02274, , (Impact factor = 6.2).

66. Noor Md. Sadiqul Hasan, Md. Habibur Rahman Sobuz, Nur Mohammad Nazmus Shaurdho and Jihad Mia (2023): Assessment of the rheological and mechanical properties of palmyra fruit mesocarp fibre reinforced eco-friendly concrete, Construction and Building Materials, Vol. 407, 1 December 2023, 133530, Elsevier Ed. (Impact factor = 7.4).

65. Md Montaseer Meraz, Nusrat Jahan Mim, Md. Habibur Rahman Sobuz, Md. Tanjid Mehedi, Badhon Bhattacharya, Md. Reduan Aftab, Md. Mustakim Billah, Md. Musfike Meraz (2023): Corrigendum to “Self-healing concrete: Fabrication, advancement, and effectiveness for long-term integrity of concrete infrastructures” [Alex. Eng. J. 73 (2023) 655–694], Alexandria Engineering Journal, Elsevier Ed., Vol. 79, Page 180, , (Impact factor = 6.8).

64. Noor Md. Sadiqul Hasan, Md. Habibur Rahman Sobuz, Ayan Saha, Md Montaseer Meraz, Nur Mohammad Nazmus Shaurdho and Jihad Mia (2023): Investigation of lightweight and green concrete characteristics using coconut shell aggregate as a replacement for conventional aggregates, International Journal of Civil Engineering, Springer Link, , , (Impact factor = 1.7).

63. Noor Md. Sadiqul Hasan, Nur Mohammad Nazmus Shaurdho, Md. Habibur Rahman Sobuz, Md Montaseer Meraz, Md. Abdul Basit, Suvash Chandra Paul, and Jihad Mia (2023): Rheological, mechanical, and microstructural property assessment of eco-friendly concrete reinforced with waste areca nut husk fiber, Sustainability 2023, 15(19), 14131; MDPI Publishing (Impact factor = 3.9).

62. Noor Md. Sadiqul Hasan, Md. Habibur Rahman Sobuz, Nur Mohammad Nazmus Shaurdho, Md. Montaseer Meraz, Shuvo Dip Datta, Fahim Shahriyar Aditto, Md. Kawsarul Islam Kabbo, Md Jihad Miah (2023): Eco-friendly concrete incorporating palm oil fuel ash: Fresh and mechanical properties with machine learning prediction, and sustainability assessment, Heliyon, Elsevier Ed., Vol. 9, No. 11, e22296, (Impact factor = 4.0).

61. Md. Hamidul Islam, David William Law, Chamila Gunasekara, Md. Habibur Rahman Sobuz, Md. Nafiur Rahman, Md. Ahsan Habib, Ashanul Kabir Sabbir (2024): Investigation of Banana Leaf Ash as Pozzolanic Material to produce Green Concrete, Materials 2024, 17(3), 720, MDPI Publishing, .

60. Shuvo Dip Datta, Mobasshira Islam, Md. Habibur Rahman Sobuz, Shakil Ahmed, Moumita Kar (2024): Artificial intelligence and machine learning applications in the project lifecycle of the construction industry: A comprehensive review, Heliyon, Elsevier Ed., , e26888,

59. Zaman A A U, Abdelaty A, Md. Habibur Rahman Sobuz (2024). Integration of BIM data and real-time game engine applications: Case studies in construction safety management, ITcon Vol. 29, pg. 117-140,

58. Shuvo Dip Datta, Md. Habibur Rahman Sobuz, Norsuzailina Mohamed Sutan, Shoaib Islam (2023): Structural Sustainable Recycled Aggregate Concrete Production Under Environmental Conditions, International Journal of Integrated Engineering, International Journal of Integrated Engineering, 15(9), 64–.

57. Md. Adnan Hossain, Shuvo Dip Datta, Abu Sayed Mohammad Akid, Md. Habibur Rahman Sobuz, Md. Saiful Islam (2023): Exploring the synergistic effect of fly ash and jute fiber on the fresh, mechanical and non-destructive characteristics of sustainable concrete, Heliyon, Elsevier Ed., (Impact factor = 4.0).

56. Zhixing Li, Xin He, Zhuojun Ding, Md. Mehrab Hossain, Md. Tanvir Rahman Rifat, Md. Habibur Rahman Sobuz & Yafei Zhao (2024): Analysis of influencing factors for housing construction technology in Desakota Village and town communities in China. Humanit Soc Sci Commun 11, 432, Springer Nature,

55. Md. Habibur Rahman Sobuz, Ayan Saha, Abu Sayed Mohammad Akid, Thomas Vincent, Vivian W. Y. Tam, and Norsuzailina Mohamed Sutan (2022): Performance of self-compacting concrete made with waste glass as secondary coarse aggregate, Journal of Sustainable-Cement Based Materials, Taylors and Francis, Published online: 18 Jun 2022, . (Impact factor = 4.4).

54. Md. Habibur Rahman Sobuz, Shuvo Dip Datta, Abu Sayed Mohammad Akid, Vivian W. Y. Tam, Farhad Aslani, and Norsuzailina Mohamed Sutan (2022): Evaluating the effects of recycled aggregate size and concentration on properties of high-strength sustainable concrete, Journal of King Saud University - Engineering Sciences, Elsevier Ed., Available online 30 April 2022. .

53. Md. Habibur Rahman Sobuz, Shuvo Dip Datta, and Abu Sayed Mohammad Akid (2022): Investigating the combined effect of aggregate size and sulphate attack on producing sustainable recycled aggregate concrete, Australian Journal of Civil Engineering, Taylor & Francis, Published online: 15 Jun 2022.

52. Bader Aldeen Ayman Almahameed, Md. Habibur Rahman Sobuz (2023): The role of hybrid machine learning for predicting strength behavior of sustainable concrete, Civil Engineering and Architecture, Horizon Research Publishing, Vol.11, No. 4, pp. 2012-2032.

51. Al-Saraireh Majd Ali, Md. Habibur Rahman Sobuz (2024): Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete Production: A Review, Civil Engineering and Architecture, Vol. 12, No. 4, pp. 2952 – 2969, https://doi.org/10.13189/cea.2024.120433.84).

50. Md. Habibur Rahman Sobuz, Ayan Saha, Jannatul Ferdous Anamika, Moustafa Houda, Marc Azab, Abu Sayed Mohammad Akid, and Md. Jewel Rana (2022): Development of self-compacting concrete incorporating rice husk ash with waste galvanized copper wire fiber, Building, MDPI Publishing, Vol. 12, Issue 7, 1024;

49. Noor Md. Sadiqul Hasan, Nur Mohammad Nazmus Shaurdho, Md. Habibur Rahman Sobuz, Md Montaseer Meraz, Md. Saidul Islam and Md. Jihad Miah (2023): Utilization of waste glass cullet as partial substitutions of coarse aggregate to produce eco-friendly concrete: Role of metakaolin as cement replacement, Sustainability, MDPI Publishing, Vol. 15, Issue 14, 11254;

48. Md. Mehrab Hossain, Shakil Ahmed, S.M. Asif Anam, Irmatova Aziza Baxramovna, Tamanna Islam Meem, Md. Habibur Rahman Sobuz, and Iffat Haq (2023): BIM-based smart safety monitoring system using a mobile app: a case study in an ongoing construction site, Construction Innovation, Emerald Publishing Limited., Article publication date: 10 July 2023,

47. Md. Habibur Rahman Sobuz, Ayan Saha, Jannatul Ferdous Anamika, Moustafa Houda, Marc Azab, Abu Sayed Mohammad Akid, and Md. Jewel Rana (2022): Development of self-compacting concrete incorporating rice husk ash with waste galvanized copper wire fiber, Building, MDPI Publishing, Vol. 12, Issue 7, 1024;

46. Noor Md. Sadiqul Hasan, Nur Mohammad Nazmus Shaurdho, Md. Habibur Rahman Sobuz, Md Montaseer Meraz, Md. Saidul Islam and Md. Jihad Miah (2023): Utilization of waste glass cullet as partial substitutions of coarse aggregate to produce eco-friendly concrete: Role of metakaolin as cement replacement, Sustainability, MDPI Publishing, Vol. 15, Issue 14, 11254;

45. Md. Mehrab Hossain, Shakil Ahmed, S.M. Asif Anam, Irmatova Aziza Baxramovna, Tamanna Islam Meem, Md. Habibur Rahman Sobuz, and Iffat Haq (2023): BIM-based smart safety monitoring system using a mobile app: a case study in an ongoing construction site, Construction Innovation, Emerald Publishing Limited., Article publication date: 10 July 2023,

44. Md. Ikramul Hoque, Muzamir Hasan, Muzamir Hasan, Moustafa Houda, Mirvat Abdallah, and Md. Habibur Rahman Sobuz (2023): Machine learning methods to predict and analyse unconfined compressive strength of stabilised soft soil with polypropylene columns, Cogent Engineering, Taylors and Francis., Published online: 14 Jun 2023,

43. Md. Habibur Rahman Sobuz, Shuvo Dip Datta, and Mizanoor Rahman (2021): Evaluating the properties of demolished aggregate concrete with non-destructive assessment, Lecture Notes in Civil Engineering, Vol. 184, Scott Arthur et al: ADVANCES IN CIVIL ENGINEERING, 978-981-16-5546-3, 503268_1_En (22), Springer Nature, Singapore.

42. Abu Sayed Mohammad Akid, Saif Hossain, Md. Imtiaz Uddin Munshi, Md. Manjur A Elahi, Md. Habibur Rahman Sobuz, Vivian W. Y. Tam, and Md. Saiful Islam (2021): Assessing the influence of fly ash and polypropylene fiber on fresh, mechanical and durability properties of concrete, Journal of King Saud University - Engineering Sciences, Elsevier Ed., Available online 24 June 2021,

41. Shuvo Dip Datta, Md. Habibur Rahman Sobuz, Nusrat Jahan Mim, Amit Deb Nath (2023): Investigation on the effectiveness of using building information modeling (BIM) tools in project management: a case study, Revista De La Construcción. Journal of Construction, 2022(2), 306–320,

40. Md. Habibur Rahman Sobuz, Shuvo Dip Datta, Norsuzailina Mohamed Sutan, Maria Binte Mannan, Abu Sayed Mohammad Akid, Noor Md. Sadiqul Hasan and Md. Nazrul Islam (2021): Critical project management factors analysis for the sustainable construction industry of bangladesh, Journal of Building Pathology and Adaption, Emerald Publishing Limited, Vol. ahead-of-print No. ahead-of-print.

39. Md. Habibur Rahman Sobuz, Meeraz, Ayan Saha, Abu Sayed Mohammad Akid, Noor Md. Sadiqul Hasan, Mizanoor Rahman and Md. Abu Safayet (2021): Performance assessment of various seismic resistant systems for a multistory structure in different seismic zones of Bangladesh, Journal of Engineering, Design and Technology, Emerald Publishing Limited. Vol. 22 No. 3, pp. 718-738. .

38. Abu Sayed Mohammad Akid, S. M. Areman Shah, Md. Habibur Rahman Sobuz, Vivian W. Y. Tam, and Sazzad Hossain Anik (2021): Combined influence of waste steel fibre and fly ash on rheological and mechanical performance of fibre-reinforced concrete, Australian Journal of Civil Engineering, Taylor & Francis, Published online: 04 Jan 2021, .

37. Abu Sayed Mohammad Akid, Muhammad Harunur Rashid and Md. Habibur Rahman Sobuz (2021): Effect of masonry infill wall with opening on reinforced concrete frame due to seismic loading: parametric study, International Journal of Structural Engineering, Inderscience Publisher, Vol. 11, No. 1, pp. 84-105.

36. Bokul Roy, Abu Sayed Mohammad Akid, Md. Habibur Rahman Sobuz, Joyotshingha Shuvra, and Md. Saiful Islam (2021): Experimental investigation on mechanical performance of high strength concrete containing polypropylene fiber exposed to high temperature, Asian Journal of Civil Engineering, Springer Link, 22, 1595–1606 (2021),

35. Md. Jewel Rana, Md. Rakibul Hasan, Md. Habibur Rahman Sobuz, and Norsuzailina Mohamed Sutan (2020): , International Journal of Building Pathology and Adaptation, Emerald Publishing Limited, Published online: 11 November 2020, .

34. Souvik Das, Md. Habibur Rahman Sobuz, Vivian W. Y. Tam, Abu Sayed Mohammad Akid Norsuzailina Mohamed Sutan and F. M. Mynur Rahman (2020): Effects of incorporating hybrid fibres on rheological and mechanical properties of fiber reinforced concrete, Construction and Building Materials, Elsevier Ed., Vol. 262, 30 November 2020, 120561, https://doi.org/10.1016/j.conbuildmat.2020.120561 (Impact factor = 7.4).

33. Ayan Saha, Md. Habibur Rahman Sobuz, Md. Ikramul Hoque, and Rashid Muzahid (2019): Influence of waste glass aggregates on the rheological properties of self- compacting concrete (SCC), Australian Journal of Civil Engineering, Taylor & Francis, Vol. 18, No.2, pp.272-285. https://doi.org/10.1080/14488353.2020.1785666

32. Kiran Kumar Gorantla, Shaik Saboor, Md. Habibur Rahman Sobuz, Sai Siva Subramanyam Vankadaru and Chelliah Arumugam (2020): Energy cost saving prospects in buildings using various window glazing in Dhaka, International Energy Journal, Vol. 20, Special Issue 3A, October 2020: Bangabandhu Chair Special Issue (Vol. 1), pp. 485-496.1148-2 (Impact factor = 0.4

31. Shakil Ahmed and Md. Habibur Rahman Sobuz (2019): Challenges to implementing lean construction in the construction industry in bangladesh, Smart and Sustainable Built Environment, Emerald Publishing Limited, Vol.9, No.2, pp.174-207, .

30. Abu Sayed Mohammad Akid, Qudrati Al Wasiew, Md. Habibur Rahman Sobuz, Touhidur Rahman and Vivian W. Y. Tam (2020): Flexural performance of corroded reinforced concrete beam strengthened with jute fiber reinforced polymer, Advances in Structural Engineering, Sage Publishing, November 27, 2020, . (Impact factor = 1.4).

29. Shanjida Ahmed Shohana, Md. Ikramul Hoque, and Md. Habibur Rahman Sobuz (2020): Experimental investigation on hardened properties of recycled coarse aggregate concrete, Advanced in Concrete Construction, Techno Press, Vol.10, No.5, pp. 369-379, https://doi.org/10.12989/acc.2020.10.5.369 (Impact factor = 2.44).

28. Md. Jewel Rana, Md. Rakibul Hasan, Md. Habibur Rahman Sobuz, and Vivian W. Y. Tam (2020): , International Journal of Construction Management, Taylor and Francis, Published online: 24 August 2020, .

27. Noor Md. Sadiqul Hasan, Phillip Visintin, Deric John Oehlers, Terry Bennett and Md. Habibur Rahman Sobuz (2019): Time dependent deflection of RC beams allowing for partial interaction and non-linear shrinkage, Materials and Structures, Springer Link, Vol. 52: 52, , April 2019. (Impact factor = 2.27).

26. Md. Habibur Rahman Sobuz, Ehsan Ahmed, and Norsuzailina Mohamed Sutan (2011): Deflection and cracking behavior of rc beams externally reinforced with carbon fibre laminates, Journal of Reinforced Plastics and Composites, SAGE Publications and Published in Association with , Vol. 30, No. 21, pp. 1807-1818. . (Impact factor = 1.503).

25. Md. Alhaz Uddin, Jameel Hossain, Md. Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Shahinul Islam and Amanat Ullah (2013): Experimental study on strength gaining characteristics of concrete using portland composite cement, Korean Society of Civil Engineering (KSCE), Vol.17, No.4, pp.789-796. https://doi.org/10.1007/s12205-013-0236-x

24. Md. Jewel Rana, Md. Rakibul Hasan, and Md. Habibur Rahman Sobuz (2021): , Smart and Sustainable Built Environment, Emerald Publishing Limited, Published online: 02 March 2021, .

23. Ehsan Ahmed and Md. Habibur Rahman Sobuz (2011): Experimental investigation on long-term behavior of CFRP strengthened RC beams under sustained loads, Structural Engineering and Mechanics, Techno Press, Vol. 40, No. 1, pp. 105-120 https://doi.org/10.12989/sem.2011.40.1.105 (impact factor = 0.927).

22. Ehsan Ahmed and Md. Habibur Rahman Sobuz (2011): Flexural and time-dependent performance of palm shell aggregate concrete beams, Korean Society of Civil Engineering (KSCE) Journal, Springer, , pp. 859-865. https://doi.org/10.1007/s12205-011-1148-2 (Impact factor = 0.484).

21. Shakil Ahmed and Md. Habibur Rahman Sobuz (2019): Challenges to implementing lean construction in the construction industry in bangladesh, Smart and Sustainable Built Environment, Emerald Publishing Limited, Vol.9, No.2, pp.174-207, .

20. Abu Sayed Mohammad Akid, Qudrati Al Wasiew, Md. Habibur Rahman Sobuz, Touhidur Rahman and Vivian W. Y. Tam (2020): Flexural performance of corroded reinforced concrete beam strengthened with jute fiber reinforced polymer, Advances in Structural Engineering, Sage Publishing, November 27, 2020, . (Impact factor = 1.4).

19. Shanjida Ahmed Shohana, Md. Ikramul Hoque, and Md. Habibur Rahman Sobuz (2020): Experimental investigation on hardened properties of recycled coarse aggregate concrete, Advanced in Concrete Construction, Techno Press, Vol.10, No.5, pp. 369-379, https://doi.org/10.12989/acc.2020.10.5.369 (Impact factor = 2.44).

18. Md. Jewel Rana, Md. Rakibul Hasan, Md. Habibur Rahman Sobuz, and Vivian W. Y. Tam (2020): , International Journal of Construction Management, Taylor and Francis, Published online: 24 August 2020, .

17. Noor Md. Sadiqul Hasan, Phillip Visintin, Deric John Oehlers, Terry Bennett and Md. Habibur Rahman Sobuz (2019): Time dependent deflection of RC beams allowing for partial interaction and non-linear shrinkage, Materials and Structures, Springer Link, Vol. 52: 52, , April 2019. (Impact factor = 2.27).

16. Md. Habibur Rahman Sobuz, Ehsan Ahmed, and Norsuzailina Mohamed Sutan (2011): Deflection and cracking behavior of rc beams externally reinforced with carbon fibre laminates, Journal of Reinforced Plastics and Composites, SAGE Publications and Published in Association with , Vol. 30, No. 21, pp. 1807-1818. . (Impact factor = 1.503).

15. Md. Alhaz Uddin, Jameel Hossain, Md. Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Shahinul Islam and Amanat Ullah (2013): Experimental study on strength gaining characteristics of concrete using portland composite cement, Korean Society of Civil Engineering (KSCE), Vol.17, No.4, pp.789-796. https://doi.org/10.1007/s12205-013-0236-x

14. Md. Jewel Rana, Md. Rakibul Hasan, and Md. Habibur Rahman Sobuz (2021): , Smart and Sustainable Built Environment, Emerald Publishing Limited, Published online: 02 March 2021, .

13. Ehsan Ahmed and Md. Habibur Rahman Sobuz (2011): Experimental investigation on long-term behavior of CFRP strengthened RC beams under sustained loads, Structural Engineering and Mechanics, Techno Press, Vol. 40, No. 1, pp. 105-120 https://doi.org/10.12989/sem.2011.40.1.105 (impact factor = 0.927).

12. Ehsan Ahmed and Md. Habibur Rahman Sobuz (2011): Flexural and time-dependent performance of palm shell aggregate concrete beams, Korean Society of Civil Engineering (KSCE) Journal, Springer, , pp. 859-865. https://doi.org/10.1007/s12205-011-

11. Md. Habibur Rahman Sobuz. and Ehsan Ahmed (2011): Flexural Performance of RC Beams Strengthened with Different Reinforcement Ratios of CFRP Laminates, Key Engineering Materials, Trans Tech Publications, Vols. 471-472, pp. 79-84. (Impact factor = 0.224).

10. Ehsan Ahmed and Md. Habibur Rahman Sobuz. (2011): Immediate and Time-Dependent Behavior of Carbon Fiber Reinforced Polymer (CFRP) Concrete Beams, Key Engineering Materials, Trans Tech Publications, Vols. 471-472, pp. 73-78. (Impact factor = 0.224).

9. Md. Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Nafisa Tamanna and Md. Saiful Islam (2014): Structural Light-weight Concrete Production by using Oil Palm Shell (OPS), Journal of Materials, Wiley Online Library, Vol. 2014, Article ID 870247, 6 pages. https://doi.org/10.1155/2014/870247

8. Noor Md. Sadiqul Hasan, Md. Habibur Rahman Sobuz, Nafisa Tamanna and Abubakar Sharif Auwalu (2015): Investigation into the Sutability of Kenaf Fiber to Produce Structural Concrete, Advanced Materials Letters, Vol. 6, No. 8, pp. 731-737. https://doi.org/

7. Noor Md. Sadiqul Hasan, Md. Habibur Rahman Sobuz, Nafisa Tamanna, Mohamed Slah Talha and Md. Saiful Islam (2014): Properties of Concrete by using Bagasse Ash and Recycle Aggregate, Concrete Research Letters, An International Journal, Vol. 5, No.2, pp. 768-785.

6. Md. Alhaz Uddin, Jameel Hossain, Md. Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Shahinul Islam and Khan Mahmud Amanat (2012): The Effect of Curing Time on Compressive Strength of Composite Cement Concrete, Applied Mechanics and Materials, Vol. 204-208, pp. 4105-4109.

5. Noor Md. Sadiqul hasan, Md. Habibur Rahman Sobuz, Md. Shiblee Sayed and Md. Saiful Islam (2012): The Use of Coconut Fiber in the Production of Structural Lightweight Concrete, Journal of Applied Sciences, Vol.12, No.9, pp.831-839. https://doi.org/

4. Norsuzailina Mohamed Sutan, Sinin Hamdan, Md. Habibur Rahman Sobuz, Vincent Lelanggan ak. Laja and Md. Saiful Islam (2011): Porosity and Strength of Pozzolan Modified Cement, Concrete Research Letters, Vol. 2, No.4, pp. 326-335.

3. Md. Habibur Rahman Sobuz, Ehsan Ahmed, Noor Md. Sadiqul Hasan and Md. Saiful Islam (2010): Study on Removal of Brick Clay Salinity in the Manufacture of Conventional Structural Bricks, International Journal of Civil and Structural Engineering, Vol. 1, No. 3, pp. 466-476.

2. M. A. M. Mohd Idrus, Sinin Hamdan, Md. Saiful Islam, Ahmad Azmeer Roslee, Md. Habibur Rahman Sobuz (2013): The Effect of Binder on the Physical and Mechanical Properties of Chemically Treated Sawdust Reinforced Polypropylene Composites, Journal of Applied Polymer Sciences, Vol. 129, No. 3, pp: 1534–1540.

1. Md. Saiful Islam, Sinin Hamdan, Md. Habibur Rahman Sobuz, Md. Rezaur Rahman and Abu Saleh Ahmed (2013): Thermal and Decay-Resistance Properties of Tropical Wood Plastic Composites, Journal of Composite Materials, SAGE Publications and Published on behalf of , Vol. 47, No. 12, pp. 1493-1500.